Categories
Chester County Covered Bridges Flickr Photo Journal Photography Photostream Projects Software

Bartram Covered Bridge (1860)

Bartram Covered Bridge (1860)

Newtown Square, Chester Count [38-15-17]

Built in 1860, Bartram Covered Bridge is located just off of Goshen Road about 2½ miles West of Route 252 in Newtown Square, Chester County PA.

It is not recommended to park on the side of Goshen Road itself, because many people drive to fast in this section of the road, but there is some road side parking available on Boot Road.

I had been driving past this bridge for years and never stopped to doing anything about it, until today.

The beautiful late “Indian Summer” weather, combined with the cold nights have cause a very vibrant and colorful Fall foliage surrounding the bridge.

The bridge crosses over Crum Creek, and there is a small area for kids to run around, or a blanket picnic, as well as a few benches and rocks to sit on.

When you approach the bridge from the park area, you will notice the free-standing main bridge information plaque. As you get closer to the bridge, the next sign that you will see attached to the bridge, is National Register of Historic Places plaque.

Bartram Covered Bridge – Main Sign
Bartram Covered Bridge – Main Sign
Bartram Covered Bridge – NRHP plaque
Bartram Covered Bridge – NRHP plaque

One can not walk into the middle of the bridge, because there are metal security bars covering both entrance ways from top to bottom, but as you look more closely through the bars, you can see some holiday string lights attached to the long side walls.

Bartram-Goshen Covered Bridge (Long Exterior View) (Fall)
Bartram-Goshen Covered Bridge (Long Exterior View) (Fall)

This picture was taken on the opposite side of Crum Creek from where you can park, and to reach it, you have to walk around the bridge, and into the woods, then down by the water.

[contentblock id=1]

Tech Talk

All images were taken with a Canon XTi on a Bogen (Model 3020) tripod with a Canon Remote Switch RS-60E3, using the native 16-bit Camera Raw (cr2) format. The ISO Speed was set to 100.

Images were then transferred to a Microsoft Windows XP (SP-3) based computer and converted into Adobe DNG format, with additional processing done with Adobe Lightroom and Photoshop.

Updates

[contentblock id=4]

Categories
Information Reference Software

Windows Boot Sequence

  1. Turn on your computer;
  2. The Computer initiates a POST (Power On Self Test) for devices that have a BIOS (Basic Input/Output System);
    • Test the memory & various Subsystems
      • Examples: AGP and Network cards
  3. BIOS then attempts to find the MBR (Master Boot Record)
    • A 512-byte sector (LBA 0 or HD0)
  4. If successful, the Windows OS takes Control, and looks for NTLDR(Boot Loader for Windows NT based OSes)
    1. In Vista and Server 2008, this has been replaced with:
    2. NTLDRallows:
      1. Memory Addressing
      2. Initiates the File System
      3. Reads boot.ini
    3. NTLDRhas to be at the ROOT of an active partition to detect:
      1. NTDETECT.COM
      2. BOOT.INI
      3. BOOTSECT.DOS (needed for multi-OS installs)
      4. NTBOOTDD.SYS(need for SCSI adapters)
        • Only used if:
          • Boot Drive is SCSI;
          • Not using real-mode INT 0x13;
        • Then a copy of the SCSI miniport driver is loaded for Windows to run
      5. Troubleshooting:
  5. If XP is selected in the Boot Menu, NTLDRruns:
    1. NTDETECT.COM
      • Gathers basic information from hardware BIOs
    2. BOOT.INI
    3. BOOTSECT.DOS
    4. The systems starts in 16-bit real mode, and then moves into 32-bit protected mode
    5. It is possible to select F8 for Additional Boot Modes (Safe Mode, Last Known Good Configuration, etc.)
  6. NTLDR then loads NTOSKRNL.EXE and HAL.DLL
    1. Located at: %SystemRoot%System32
    2. Additional files/locations loaded:
      1. kdcom.dll (Kernel Debugger HW)
      2. bootvid.dll (Windows Logo & Side-Scrolling bar)
  7. NTLDRreads the Registry for the following information:
    1. Hardware Profile
    2. Authorized Device Drivers
    3. And needs to be in the Exact Order
  8. “Session Manager” is then started
    1. Smss.exe starts Autochk
      1. Mounts all drives
      2. Checks drives for a Clean shutdown state
    2. Starts win32k.sys for the Graphical User Interface (GUI) interface
    3. Starts csrss.exe (Client/Server Runtime Subsystem)
      1. User-Mode Applications
    4. Creates Virtual Memory/Paging file
      1. HKLMSYSTEMCurrentControlSetControlSession ManagerMemory Management
  9. NTOSKRNL.EXE takes control and starts WINLOGON.EXE which in turn starts LSASS.EXE
    1. LSASS.EXE (Local Security Authority Subsystem Service) provides the Logon screen

– Andrew
§ § § § §
[adrotate banner=”1″]
Categories
Software Utilities

Problems with Robocopy on W2K8

Has anyone had problems getting robocopy to copy from one partition to another on W2K8? I have setup a script that copies files from a W2K3 machine to a W2K8 machine without issue.

But then I try and do a similar copy from one internal HD to an External USB drive, no files are copied!

I already know about the new “Security” related issues that were introduced with Vista and W2K8, and I have tried previous versions as well!

If you have any thoughts or ideas, they would be greatly appreciated!

TIA,

– Andrew
§ § § § §
[adrotate banner=”1″]
Categories
Software

Dynamic IP on NIC during AD/DNS Setup Issue

When setting up a Active Directory domain, dcpromo.exe can include the required DNS installation, but the Wizard may warn you that you have one NIC adapter that is NOT set to static.

This is generally caused because both IP4 and IP6 are installed by Default and both need to be set I found a quick and dirty on-line/web based utility that can help you convert the IP4 to IP6 address:

<http://ip-lookup.net/conversion.php>

An alternative approach is to just Disable IP6 for the NIC, since to take advantage of IP6, the rest of your networking infrastructure also has to support IP6 (Gateways, Routers and Switches).

Hope this helps!

– Andrew
§ § § § §
[adrotate banner=”1″]
Categories
Add-Ons Software

What CD/DVD burning software is supported?

My simple question is this:

What CD/DVD burning software is supported on Windows 2008 Standard Server?

Background:

A client of mine just bought a new HP ML350 G5 (March 2009), which came with a HP branded GSA-H53L (E2C) DVD Rewriter (Manufactured – July 2008) and bundled with Roxio DigitalMediaPlus (circa 2005 (MyDVD v6.1)).

When I start the install of the Roxio software, I immediately get a DLA error…

After Google-ing around, there are known issues with Roxio’s DLA software, and the drive itself appears to be a discontinued LG OEM model.

When the VAR that sold the Server is contacted, they point to HP…

When HP is contacted, they point to the VAR…

I have checked the following, and NONE show NAMED support for Windows 2008 Standard Server:

  • Alcohol 120%
  • Corel WinDVD 9
  • CyberLink Power2Go 6
  • Droppix Recorder XE
  • GEAR PRO Mastering Edition 8.00
  • Nero 9 nor BackItUp 4
  • NTI Media Maker 8
  • Roxio Creator 2009 nor Roxio Creator 2009 Ultimate

They support Vista, but not NAMED support for Windows 2008 Server, which the Owner of the company wants to see/hear.

What we are looking for is a simple, reliable way to burn data to CD/DVD media; create/mountISO images if need be (example: SQL 2008 install), and maybe take advantage of the LightScribe capabilities of the drive.

Can someone out there enlighten me to a product!

Thanks in advance,

Andrew

03 Oct 2009 01:02:58

All:

Sorry for not following up on this in several months, but I took the suggestion of Tim Quan, and ended up downloading and installing ImgBurn from ImgBurn.com.

After doing a couple of test burns, and several months of keeping my fingers crossed, ImgBurn seems to be working fine.

The interface does take a little getting use to, but ImgBurn does offer allot of features for the price!(FREE)

Many thanks to Tim Quan, the Author of ImgBurn and all the other folks that chipped in their two cents!

Andrew

03 Oct 2009 01:02:58

All:

Another suggested software package was StarBurn from RocketDivision, which came from Paul Svirin.

I have NOT downloaded or tried this software, but if someone out there would like to add their comments/thoughts….

– Andrew
§ § § § §
[adrotate banner=”1″]